Homing Y Axis

From Wizard Rants
Revision as of 01:09, 12 July 2020 by Northrup2 (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

; homey.g

; called to home the Y axis

;

; generated by RepRapFirmware Configuration Tool v3.1.3 on Sat Jun 20 2020 01:09:39 GMT-0500 (CDT)

G91               ; relative positioning

G1 H2 Z5 F6000    ; lift Z relative to current position

G1 H1 Y-305 F1800 ; move quickly to Y axis endstop and stop there (first pass)

G1 Y5 F6000       ; go back a few mm

G1 H1 Y-305 F360  ; move slowly to Y axis endstop once more (second pass)

G1 H2 Z-5 F6000   ; lower Z again

G90               ; absolute positioning

Retrieved from "https://wiki.8bitwizard.net/index.php?title=Homing_Y_Axis&oldid=116"