Duet 3D

From Wizard Rants
Revision as of 09:21, 27 June 2020 by Northrup2 (talk | contribs) (formatting of a referenced file on a file system.)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Duet 3 6HC Main Board

Connector parts can be found from Digi-Key

Stepper Motor Connector: VHR-4N / 455-1185-ND

Stepper Motor Connector Pins: SVH-41T-P1.1 / 455-1319-1-ND

PanelDue 7i

When running RepRap 3.1 or later your config.g must now contain explicit statements about the baud rate for the panel. For the Duet 3D 3 6HC board the following is correct

M575 P1 S1 B57600

This sets the M575 command for the IO_0 port.

Retrieved from "https://wiki.8bitwizard.net/index.php?title=Duet_3D&oldid=103"