Homing Y Axis: Difference between revisions
Jump to navigation
Jump to search
Created page with "<code>; homex.g</code> <code>; called to home the X axis</code> <code>;</code> <code>; generated by RepRapFirmware Configuration Tool v3.1.3 on Sat Jun 20 2020 01:09:39 GMT..." |
mNo edit summary |
||
| Line 1: | Line 1: | ||
<code>; | <code>; homey.g</code> | ||
<code>; called to home the | <code>; called to home the Y axis</code> | ||
<code>;</code> | <code>;</code> | ||
| Line 11: | Line 11: | ||
<code>G1 H2 Z5 F6000 ; lift Z relative to current position</code> | <code>G1 H2 Z5 F6000 ; lift Z relative to current position</code> | ||
<code>G1 H1 | <code>G1 H1 Y-305 F1800 ; move quickly to Y axis endstop and stop there (first pass)</code> | ||
<code>G1 | <code>G1 Y5 F6000 ; go back a few mm</code> | ||
<code>G1 H1 | <code>G1 H1 Y-305 F360 ; move slowly to Y axis endstop once more (second pass)</code> | ||
<code>G1 H2 Z-5 F6000 ; lower Z again</code> | <code>G1 H2 Z-5 F6000 ; lower Z again</code> | ||
<code>G90 ; absolute positioning</code> | <code>G90 ; absolute positioning</code> | ||
Latest revision as of 01:09, 12 July 2020
; homey.g
; called to home the Y axis
;
; generated by RepRapFirmware Configuration Tool v3.1.3 on Sat Jun 20 2020 01:09:39 GMT-0500 (CDT)
G91 ; relative positioning
G1 H2 Z5 F6000 ; lift Z relative to current position
G1 H1 Y-305 F1800 ; move quickly to Y axis endstop and stop there (first pass)
G1 Y5 F6000 ; go back a few mm
G1 H1 Y-305 F360 ; move slowly to Y axis endstop once more (second pass)
G1 H2 Z-5 F6000 ; lower Z again
G90 ; absolute positioning